How To Hook Up Pool Vacuum To Intex Pump Guideline

If you’re the proud owner of an Intex swimming pool, then you know that keeping it clean and clear is a top priority. One way to make sure your pool stays sparkly is to use a pool vacuum. We’ll show you how to hook up your pool vacuum to your Intex pump. Keep reading for easy step-by-step instructions!

Connect the vacuum hose to the skimmer box on your pool

The skimmer box is the part of your pool that sucks up the water and dirt. It’s located on the side of your pool, near the filter. There will be a hole in the side of the box where you can connect your vacuum hose.

Attach the other end of the vacuum hose to your pool pump: The pump is the part of your pool that sucks up the water and pushes it through the filter. The vacuum hose will attach to the pump with a clamp or connector. Make sure the hose is tightly secured so that it doesn’t come loose while the pump is running.

Turn on the pump: Now that the hose is attached, it’s time to turn on the pump. On the front of the pump, there should be a switch with three settings: Off, Low, and High. Make sure the switch is in the “On” position and wait for the pump to start up.

Start cleaning your pool: Once the pump is running, you can start using the vacuum. Just hold the vacuum hose in one hand and move it around the bottom of the pool. The pump will suck up the dirt and water and deposit it into the skimmer box. Keep vacuuming until your pool is clean!

Plugin the Intex pump and turn it on

The Intex pump comes with a power cord that plugs into an outlet. Make sure the outlet is turned on and plug in the power cord. There should be a switch on the front of the pump with three settings: Off, Low, and High. Make sure the switch is in the “On” position and wait for the pump to start up.

Turn on the vacuum by flipping the switch on the handle

Now that the pump is running, you can start using the vacuum. Just hold the vacuum hose in one hand and move it around the bottom of the pool. The pump will suck up the dirt and water and deposit it into the skimmer box. Keep vacuuming until your pool is clean!

Once your pool is clean, you can turn off the pump by flipping the switch to the “Off” position. Make sure to unplug the power cord from the outlet when you’re done!

Move the vacuum around the pool

Just hold the vacuum hose in one hand and move it around the bottom of the pool. The pump will suck up the dirt and water and deposit it into the skimmer box.

pool vacuum make sure to clean all areas: the pool floor, the walls, and the steps. Vacuuming all these areas will keep your pool looking clean and sparkly!

Intex pools are a great option for those who want an affordable swimming pool. And keeping your Intex pool clean is easy with a pool vacuum.

Unplug the pump and disconnect the hose from the skimmer box

This is the first step in disconnecting the pool vacuum from the Intex pump. Turn off the pump by flipping the switch to the “Off” position: This is the second step in disconnecting the pool vacuum from the Intex pump.

Unplug the power cord from the outlet, This is the third and final step in disconnecting the pool vacuum from the Intex pump.

Now that you know how to disconnect the pool vacuum from the Intex pump, you can store the vacuum hose and the pump in a safe place until you’re ready to use them again.